HeNe Power Supplies

  • Out of stock
    The Melles Griot model L08105-1 will operate most 15 to 21 inch long HeNe tubes or heads. Hook up sheet included. These are used units, tested and working.

    Specifications:

    Input: 10.5 to 14 VDC, 1.7 to 2.2 Amp Output: 2500 to 3100 VDC, 5.5 to 7.0mA, user adjustable (preset @ 6.5mA) Start voltage:  >10KV Dimensions:  4.75" x 2.96" x 1.25" (121 x 75 x 32mm)

    Features:

    4 second Turn-on delay (defeat by cutting violet wire loop) TTL turn-on (yellow wire to ground=ON) Alden high voltage output connector. RoHS compliant
  • The Melles Griot model 05-PSAA-905-065 will operate most 8 to 14 inch long HeNe tubes. These are new units and have European standard wire color code. Specifications: Input Voltage: 115 / 230 VAC ±10%, 50 to 400 Hz. Output Voltage: 1850 to 2450 VDC. Output Current:  5.5 to 7 mA, preset at 6.5 mA. Trigger Voltage: >10 KV Input Leads: 4.5 inches, 22 AWG. Flying. Output Leads: Flying, 10 inches cathode lead with tube clip, 5 inches anode lead with slide-on  ballast resistor (80K Ohm). Dimensions: 6.0 x 1.5 x 1.2 inches (154 x 39 x 31 mm) Mounting holes: 2.3 inch center spacing.

    Features:

    4 second Turn-on delay (defeat by cutting violet wire loop) Output current adjustable with onboard trimpot. RoHS compliant.
  • Laser Drive inc. model number 380T-2700-3900-6.5-4 This new, re-labeled power supply will operate a typical 18 to 25 inch long HeNe laser. Hook-up diagram included. Specifications: Input Voltage:   100-120 / 200-230 VAC, 50 to 400 Hz. Output Voltage: 2700 to 3900 VDC. Output Current:  5.5 to 7.0 mA user adjustable. Preset at 6.5 mA Trigger Voltage: >12 KV Input Leads:      12", 22 AWG. Flying. Output Leads:    12", Alden high voltage connector. CDRH delay:       4 seconds. (Defeatable by cutting violet wire loop) Dimensions:       7" X 2.4" X 1.4" (178 x 61 x 36 mm) Mounting holes: 0.15" diameter x 3, 2.95" x 1.8" center spacing. Warranty:           30 days from date of purchase.
  • Out of stock
    The Melles Griot model 05-LPM-968-065 will operate most 8  to  11 inch long HeNe tubes or heads. These are new units and have European standard wire color code. Specifications: Input Voltage: 115 / 230 VAC ±10%, 50 to 400 Hz. Output Voltage: 1600 to 2000 VDC. Output Current:  5.5 to 7 mA, preset at 6.5 mA. Trigger Voltage: >10 KV Input Leads: 10 inches, 22 AWG. Flying. Output Leads: Alden high voltage connector Dimensions: 6.0 x 1.5 x 1.2 inches (154 x 39 x 31 mm) Mounting holes: 2.3 inch center spacing.

    Features:

    4 second Turn-on delay (defeat by cutting violet wire loop) Alden high voltage output connector. Output current adjustable with onboard trimpot RoHS compliant
  • The Melles Griot model 05-LPM-371-065 will operate most 15 to 23 inch long HeNe tubes or heads.

    Specifications:

    Input: 10 to 14 VDC, 1.7 to 2.5 Amps. 25 Watts max Output: 2500 to 3500 VDC, 5.8 to 8.0mA, user adjustable (preset @ 6.5mA) Start voltage:  >10KV Dimensions:  4.9" x 3.3" x 1.2" (125 x 84 x 30mm)

    Features:

    4 second Turn-on delay (defeat by cutting violet wire loop) TTL turn-on (yellow wire to ground=ON) Alden high voltage output connector.
  • Out of stock
    Laser Drive inc. model number 314T-2450-6-4 Specifications: Input Voltage:   115 / 230 VAC, 50 to 400 Hz. Output Voltage: 2450 VDC. ∓200V Output Current: 6.5 mA Trigger Voltage: >10 KV Input Leads:      7", 22 AWG. Flying. Output Leads:    Alden high voltage connector. CDRH delay:      3 to 5 seconds. (Defeatable by cutting violet wire loop) Dimensions:      4.3" x  3" x 1.2" (110 x 76 x 30 mm) Mounting holes: 0.15 diameter x3.   2.3" x 2.5" center spacing. Warranty:             30 days from date of purchase. RoHS Compliant
  • The Melles Griot model 05-LPM-900-045 will operate most 6 to 8 inch long HeNe tubes or heads. These are new units and have Japanese standard wire color code. Specifications: Input Voltage: 100/200 VAC ±10%, 50 to 400 Hz. Output Voltage: 1150 to 1350 VDC. Output Current:  4.5 mA, fixed Trigger Voltage: 10 KV Input Leads: 12 inches, 22 AWG. Flying. Output Leads: Alden high voltage connector Dimensions: 4.3 x 3.0 x 1.2 inches (109 x 76 x 31 mm) Mounting holes: 2.3 and 2.5 inch center spacing.

    Features:

    4 second Turn-on delay (defeat by cutting violet wire loop) Alden high voltage output connector RoHS compliant

  • Out of stock
    Melles Griot model number 05-LPM-915-065 This is a new, old stock power supply  that will operate a typical 17 to 20 inch long HeNe laser head. Specifications: Input Voltage:   115 / 230 VAC, 50 to 400 Hz. Output Voltage:  3100 to 3700 VDC. Output Current:  5.5 to 7.0 mA user adjustable. Preset at 6.5 mA Trigger Voltage: >12 KV Input Leads:      12", 22 AWG. Flying. Output Leads:    12", Alden high voltage connector. CDRH delay:       4 seconds. (Defeatable by cutting violet wire loop) Dimensions:       7" X 2.4" X 1.4" (178 x 61 x 36 mm) Mounting holes: 0.15" diameter x 3, 2.95" x 1.8" center spacing. Warranty:           30 days from date of purchase.
  • Out of stock
    The Melles Griot model 05-LPM-905-065 will operate most 11 to  15  inch long HeNe tubes or heads. These are new power supplies and have European standard wire color code. Specifications: Input Voltage: 115 / 230 VAC ±10%, 50 to 400 Hz. Output Voltage: 1850 to 2450 VDC. Output Current:  5.5 to 7 mA, preset at 6.5 mA. Trigger Voltage: >10 KV Input Leads: 12 inches, 22 AWG. Flying. Output Leads: Alden high voltage connector Dimensions: 6.0 x 1.5 x 1.2 inches (154 x 39 x 31 mm) Mounting holes: 2.3 inch center spacing.

    Features:

    4 second Turn-on delay (defeat by cutting violet wire loop) Alden high voltage output connector. Output current adjustable with onboard trimpot RoHS compliant
  • Laser Drive Inc. model number 314S-1250-4-1 This is a new power supply with USA standard wire colors. It will operate a typical 5 to 7  inch long HeNe laser. Hook-up diagram included. Specifications: Input Voltage:   115 / 230 VAC, 50 to 400 Hz. Output Voltage:  1250 VDC ±200 VDC Output Current:  4.0 mA Trigger Voltage: >10 KV Input Leads:      12", 22 AWG. Flying. Output Leads:    12" Flying. CDRH delay:       None Dimensions:       4.25" X 3.3" X 1.25" (108 x 84 x 32 mm) Mounting holes: 0.15" diameter  3x,  2.5" x 2.3" center spacing. Warranty:           30 days from date of purchase.
  • Melles Griot model number 05-LPM-914-065 This is a new power supply with a TTL disable function. It will operate a typical 8 to 11  inch long HeNe laser. Hook-up diagram included. Specifications: Input Voltage:   115 / 230 VAC, 50 to 400 Hz. Output Voltage:  1550-1950 VDC Output Current:  5 to 7 mA. adjustable via trim pot. preset at 6.5 mA Trigger Voltage: >10 KV Input Leads:      12", 22 AWG. Flying. Output Leads:    7"  with Alden HV connector CDRH delay:       None TTL function:    0 VDC = ON, 5 VDC = OFF White wire with yellow stripe:+, White wire with black stripe:- Dimensions:       4.25" X 3.3" X 1.25" (108 x 84 x 32 mm) Mounting holes: 0.15" diameter  3x,  2.5" x 2.3" center spacing. Warranty:           30 days from date of purchase.
  • Out of stock
    Laser Drive inc. model number 314T-2300-6-4 Specifications: Input Voltage:   115 / 230 VAC, 50 to 400 Hz. Output Voltage: 2300 VDC. ∓200V Output Current: 6.0 mA Trigger Voltage: >10 KV Input Leads:      7", 22 AWG. Flying. Output Leads:    Alden high voltage connector. CDRH delay:      3 to 5 seconds. (Defeatable by cutting violet wire loop) Dimensions:      4.3" x  3" x 1.2" (110 x 76 x 30 mm) Mounting holes: 0.15 diameter x3.   2.3" x 2.5" center spacing. Warranty:             30 days from date of purchase. RoHS Compliant
Go to Top