-
These are new, old stock hard sealed laser tubes for your OEM, replacement, or experimental needs. Other types of tubes may be available. Please email us for more information. SPECIFICATIONS: Manufacture / Part Number: Melles Griot, model 05-LHR-006 Output Power: 0.8 mW minimum Wavelength: 632.8 nm RED Polarization: Random Mode: TEMoo Beam Diameter: 0.47 mm Beam Divergence: 1.7 mRads. Light Exit: Anode end of tube. Operating Voltage: 1290 VDC (with ballast). Start Voltage: 8 KV. Operating Current: 3.0-4.5mA, 3.7 mA Ideal. Recommended Ballast Resistor: 68 K Ohms, 3 Watt. (Add in series to the anode lead within 3" of the tube.) Recommended Power Supply: E-15, DG-15 Dimensions: 5.8" (148 mm) long x 1.0" (25.4 mm) diameter. Warranty: Limited 30 days from date of purchase. -
Out of stock
These are new, old stock hard sealed laser tubes for your OEM, replacement, or experimental needs. Other types of tubes may be available. Please email us for more information. SPECIFICATIONS: Manufacture / Part Number: Melles Griot, model 05-LHR-004 Output Power: 0.6 mW minimum Wavelength: 632.8 nm RED Polarization: Random Mode: TEMoo Beam Diameter: 0.47 mm Beam Divergence: 1.7 mRads Light Exit: Cathode end of tube. Operating Voltage: 1290 VDC (with 68 K ballast) Start Voltage: 8 KV Operating Current: 3.0-4.5mA, 3.7mA Ideal Recommended Ballast Resistor: 68 K Ohms, 3 Watt (Add in series to the anode lead within 3" of the tube.) Recommended Power Supply: E-15, DG-15 Dimensions: 5.3" (145 mm) long x 1.0" (25.4 mm) diameter Warranty: Limited 30 days from date of purchase. -
Out of stock
These are new, old stock laser tubes for your OEM, replacement, or experimental needs. Other types of tubes may be available. Please email us for more information.SPECIFICATIONS:
Manufacture / Part Number: Melles Griot, model 05-LHR-410 / Gammex 201A393 Output Power: 0.6 mW minimum, 1.4 mW typical Wavelength: 632.8 nm RED Polarization: Random Mode: TEMoo Beam Diameter: 0.95 mm Beam Divergence: 1.35 mRads Light Exit: Cathode end of tube Operating Voltage: 1290 VDC with 75K ballast Start Voltage: 10 KV Operating Current: 4.5 mA Ideal Recommended Ballast Resistor: 75 K Ohms, 3 Watt. (Add in series to the anode lead within 3" of the tube.) Recommended Power Supply: E-15, DG-15, LAB-S-15 Dimensions: 7.9" (200mm) long x 1.45" (37mm) diameter. Warranty: Limited 30 days from date of purchase. -
These are new, old stock laser tubes for your OEM, replacement, or experimental needs. Other types of tubes may be available. Please email us for more information. SPECIFICATIONS: Manufacture / Part Number: Uniphase model 1007 Output Power: 0.8 mW minimum Wavelength: 632.8 nm RED Polarization: Random Mode: TEMoo Beam Diameter: 0.48 mm Beam Divergence: 1.7 mRads. Light Exit: Anode end of tube. Operating Voltage: 1250 VDC (with 68 K ballast). Start Voltage: 8 KV. Operating Current: 4.0 mA Ideal. Recommended Ballast Resistor: 68 K Ohms, 2 Watt. (Add in series to the anode lead within 3" of the tube.) Recommended Power Supply: E-15, DG-15 Dimensions: 5.8" (148 mm) long x 1.0" (25.4 mm) diameter. Warranty: Limited 30 days from date of purchase. -
These are new, old stock hard sealed laser tubes for your OEM, replacement, or experimental needs. Other types of tubes may be available. Please email us for more information. SPECIFICATIONS: Manufacture / Part Number: Melles Griot, model 05-LHR-007 Output Power: 0.4 mW minimum Wavelength: 632.8 nm RED Polarization: Random Mode: TEMoo Beam Diameter: 0.34 mm Beam Divergence: 2.40 mRads Light Exit: Cathode end of tube. Operating Voltage: 1220 VDC (with 68 K ballast) Start Voltage: 8 KV Operating Current: 2.7-4.0mA, 3.2mA Ideal Recommended Ballast Resistor: 68 K Ohms, 2 Watt (Add in series to the anode lead within 3" of the tube.) Recommended Power Supply: E-15, DG-15 Dimensions: 4.66" (118 mm) long x 0.89" (22.5 mm) diameter Warranty: Limited 30 days from date of purchase. -
These are new, old stock hard sealed laser tubes for your OEM, replacement, or experimental needs. Other types of tubes may be available. Please email us for more information. SPECIFICATIONS: Manufacture / Part Number: Melles Griot, model 05-LHR-640 Output Power: 0.5 mW minimum Wavelength: 632.8 nm RED Polarization: Random Mode: TEMoo Beam Diameter: 0.46 mm Beam Divergence: 1.70 mRads Light Exit: Cathode end of tube. Operating Voltage: 1180 VDC (with 68 K ballast) Start Voltage: 8 KV Operating Current: 3.5-4.8mA, 4.5mA Ideal Recommended Ballast Resistor: 68 K Ohms, 3 Watt (Add in series to the anode lead within 3" of the tube.) Recommended Power Supply: E-15, DG-15 Dimensions: 5.0" (127 mm) long x 1.0" (25.4 mm) diameter Warranty: Limited 30 days from date of purchase. -
These are new, hard sealed laser tubes for your OEM, replacement, or experimental needs. Other types of tubes may be available. Please email us for more information.SPECIFICATIONS:
Manufacture / Part Number: Melles Griot, model 05-LHP-122 Output Power: 2.0 mW minimum, 2.5 mW typical Wavelength: 632.8 nm RED Polarization: Linear polarized >500:1 Mode: TEMoo Beam Diameter: 0.80 mm Beam Divergence: 1.35 mRads. Light Exit: Cathode end of tube. Operating Voltage: 1400 VDC (1850 VDC with 75K ballast). Start Voltage: 10 KV. Operating Current: 6.5 mA Ideal Recommended Ballast Resistor: 75 K Ohms, 5 Watt. (Add in series to the anode lead within 3" of the tube.) Recommended Power Supply: E-21, F-22, DG-22, LAB-S-22. Dimensions: 8.9" (228mm) long x 1.45" (36.8mm) diameter. Warranty: Limited 30 days from date of purchase. -
These are new, old stock hard sealed laser tubes for your OEM, replacement, or experimental needs. Other types of tubes may be available. Please email us for more information. Specifications: Output Power: 10 mW minimum 12 mW typical 15 mW maximum. Wavelength: 632.8 nm RED Polarization: Random Mode: Multimode Beam Diameter: 1.2 mm Beam Divergence: 3.4 mRads. Light Exit: Cathode end of tube. Operating Voltage: 2390 VDC (with 75K ballast). Start Voltage: 10KV. Operating Current Range: 6 to 7 mA, 6.5 mA Ideal. Recommended Ballast Resistor: 75K Ohms, 5 Watt. (Add in series to the anode lead within 3" of the tube.) Recommended Power Supply: DG-22, E-21, LAB-S-22. Dimensions: 13.8" long x 1.45" diameter. Warranty: Limited 30 days from date of purchase.
-
Out of stock
These are new, old stock hard sealed laser tubes for your OEM, replacement, or experimental needs. Other types of tubes may be available. Please email us for more information. SPECIFICATIONS: Manufacture / Part Number: Uniphase model 1018 Output Power: 2.0mW minimum Wavelength: 632.8 nm RED Polarization: Random Mode: TEMoo Beam Diameter: 0.55 mm Beam Divergence: 1.5 mRads. Light Exit: Cathode end of tube. Operating Voltage: 1700 VDC (with 68 K ballast). Start Voltage: 8 KV. Operating Current: 4.5 mA Ideal. Recommended Ballast Resistor: 68 K Ohms, 2 Watt. (Add in series to the anode lead within 3" of the tube.) Recommended Power Supply: E-15, DG-15 Dimensions: 7.5" (191 mm) long x 1.0" (25.4 mm) diameter. Warranty: Limited 30 days from date of purchase. -
Melles Griot model 05-FDS-207 fiber optic laser beam delivery system in factory box. This model is designed for peak efficiency at 633nm but will also work well with Yellow and Orange HeNe lasers . It produces a well collimated beam and maintains polarization. This is a used, tested system.
System includes:
-
Kinematic fiber launch with standard laser head mount
-
1 meter fiber optic cable with pre-aligned optics
-
-
We stock Voltex Hene laser power supplies known for their high efficiency, reliability, and rugged construction. Hook-up diagram included. Specifications: Input Voltage: 110 / 220 VAC, 50 to 60 Hz. Output Voltage: 1900 to 2600 VDC. Output Current: 4 to 7 mA, user adjustable. Trigger Voltage: 10 KV Input Leads: 10", 22 AWG. Flying. Output Leads: Alden high voltage connector or equivalent. Dimensions: 3.5" X 2.5" X 1.0" Mounting holes: 2.3" center spacing. Warranty: 30 days from date of purchase. -
We stock Voltex HeNe laser power supplies known for their high efficiency, reliability, and rugged construction. Hook-up diagram included. These are new units Specifications: Input Voltage: 10 to 15 VDC, 15 to 20 Watts. Output Voltage: 1900 to 2600 VDC. Output Current: 4.5 to 7 mA, user adjustable. Trigger Voltage: 10 KV Input Leads: 10", 22 AWG. Flying. Output Leads: Alden high voltage connector or equivalent. Dimensions: 3.75 X 1.5 X 1.0 inches (95 x 38 x 25 mm) Mounting holes: 2.3" center spacing. Warranty: 30 days from date of purchase. Features: 4 second Turn-on delay (defeat by cutting violet wire loop) TTL turn-on (yellow wire to ground=ON) Alden high voltage output connector. -
We stock Voltex Hene laser power supplies known for their high efficiency, reliability, and rugged construction. Hook-up diagram included. These are new units Specifications: Input Voltage: 22 to 30 VDC, 15 to 20 Watts. Output Voltage: 1900 to 2600 VDC. Output Current: 4.5 to 7 mA, user adjustable. Trigger Voltage: 10 KV Input Leads: 10", 22 AWG. Flying. Output Leads: Alden high voltage connector or equivalent. Dimensions: 3.75 X 1.5 X 1.0 inches (95 x 38 x 25 mm) Mounting holes: 2.3 inches center spacing. Warranty: 30 days from date of purchase.Features:
4 second Turn-on delay (defeat by cutting violet wire loop) TTL turn-on (yellow wire to ground=ON) Alden high voltage output connector. -
We stock Voltex HeNe laser power supplies known for their high efficiency, reliability, and rugged construction. Hook-up diagram included. These are new units Specifications: Input Voltage: 10 to 14 VDC, 15 to 20 Watts. Output Voltage: 1100 to 1800 VDC. Output Current: 3 to 6.5 mA, user adjustable. Trigger Voltage: >8KV Input Leads: 10", 22 AWG. Flying. Output Leads: Alden high voltage connector or equivalent. Dimensions: 3.75 X 1.5 X 1.0 inches (95 x 38 x 25 mm) Mounting holes: 2.3" center spacing. Warranty: 30 days from date of purchase. Features: 4 second Turn-on delay (defeat by cutting violet wire loop) TTL turn-on (yellow wire to ground=ON) Alden high voltage output connector. -
We stock Voltex HeNe laser power supplies known for their high efficiency, reliability, and rugged construction. Hook-up diagram included. Specifications: Input Voltage: 110 / 220 VAC, 50 to 60 Hz. Output Voltage: 1300 to 1900 VDC. Output Current: 3 to 6 mA, user adjustable. Trigger Voltage: >8 KV Input Leads: 10", 22 AWG. Flying. Output Leads: Alden high voltage connector or equivalent. Dimensions: 3.5" X 2.5" X 1.0" Mounting holes: 2.3" center spacing. Warranty: 30 days from date of purchase. -
We stock Voltex HeNe laser power supplies known for their high efficiency, reliability, and rugged construction. Hook-up diagram included. These are new units Specifications: Input Voltage: 22-30 VDC, 10 to 15 Watts. Output Voltage: 1300 to 1900 VDC. Output Current: 3 to 6 mA, user adjustable. Preset at 4.5 mA Trigger Voltage: >8KV Input Leads: 10", 22 AWG. Flying. Output Leads: Alden high voltage connector or equivalent. Dimensions: 3.75 X 1.5 X 1.0 inches (95 x 38 x 25 mm) Mounting holes: 2.3" center spacing. Warranty: 30 days from date of purchase. Features: 4 second Turn-on delay (defeat by cutting violet wire loop) TTL turn-on (yellow wire to ground=ON) Alden high voltage output connector. -
We stock Voltex Hene laser power supplies known for their high efficiency, reliability, and rugged construction. Hook-up diagram included. Specifications: Input Voltage: 110 / 220 VAC, 50 to 60 Hz. Output Voltage: 2400 to 3200 VDC. Output Current: 5 to 7 mA, user adjustable. Trigger Voltage: 10 KV Input Leads: 10", 22 AWG. Flying. Output Leads: Alden high voltage connector or equivalent. Dimensions: 3.5" X 2.5" X 1.0" Mounting holes: 2.3" center spacing. Warranty: 30 days from date of purchase. -
These are new, hard sealed laser heads for your OEM, replacement, or experimental needs. Heads have integral ballast resistor. Other types of heads may be available. Please call for more information. SPECIFICATIONS: Mfg. & Part Number: Melles Griot, model 05-LHP-071-221, Xerox part number: 122E00752 or 122E01003. Output Power: 2.0 mW minimum 2.5 mW typical. Wavelength: 632.8 nm RED Polarization: Linear polarized 500:1 Mode: TEMoo Beam Diameter: 0.80 mm Beam Divergence: 1.0 mRads. Operating Voltage: 1750 VDC. Start Voltage: 8 KV. Operating Current Range: 4.5 to 5.5 mA, 5.0 mA Ideal. Input Lead: Male Alden connector with a 380 mm long cord, and external case ground connector. Recommended Power Supply: LAB-S-15, E-15, F-22, DG-15 Dimensions: 262 mm long x 35.6 mm diameter. Warranty: Limited 30 days from date of purchase. -
These are good used, hard sealed laser tubes for your OEM, replacement, or experimental needs. Other types of tubes may be available. Please email us for more information. Specifications: Output Power: 4.5 mW minimum 6.0 mW typical 8.0 mW maximum. Wavelength: 632.8 nm RED Polarization: Linear 500:1, (random may be available, please call or email for availability) Mode: TEMoo Beam Diameter: 0.80 mm Beam Divergence: 1.0 mRads. Light Exit: Cathode end of tube. Operating Voltage: 2390 VDC (with 75K ballast). Start Voltage: 10KV. Operating Current Range: 6 to 7 mA, 6.5 mA Ideal. Recommended Ballast Resistor: 75K Ohms, 5 Watt. (Add in series to the anode lead within 3" of the tube.) Recommended Power Supply: DG-22, E-21, LAB-S-22. Dimensions: 13.8" long x 1.45" diameter. Warranty: Limited 30 days from date of purchase.
-
Melles Griot Lab style Helium Neon laser power supply model 05-LPL-915-065 or equivalent. These are used units, tested and in good condition. Power supplies include: 1 key, remote interlock connector, and a power cord for North America. Other versions may be available including Japanese input voltage, 6 and 7 mA output versions. Please call or email us for more information. Specifications: Input: 115 / 230 VAC 50-400 Hz. Output: 3100-3700 VDC, 6 to 7 mA* (factory preset at 6.5mA) *Output current adjustable via internal trim potentiometer.* ** Please contact us if you would like us to preset the current to a specified amount.** Start voltage: >12KV. CDRH delay: 3 to 5 seconds. Defeatable by cutting internal violet wire loop. Output connector: Alden high voltage connector or equivalent. Remote interlock: Jones plug type series circuit. Jumpered connector included. Dimensions: 2.1 x 6.3 x 9.5 inches ( 54 x 161 x 242 mm). Warranty: 30 days from date of purchase. -
We stock Voltex HeNe laser power supplies known for their high efficiency, reliability, and rugged construction. Hook-up diagram included. Specifications: Input Voltage: 110 / 220 VAC, 50 to 60 Hz. Output Voltage: 3200 to 4000 VDC. Output Current: 5 to 7 mA, user adjustable. Trigger Voltage: 12 KV Input Leads: 10", 22 AWG. Flying. Output Leads: Alden high voltage connector or equivalent. Dimensions: 4.3" X 3.3" X 1.3" Mounting holes: 2.3" center spacing. Warranty: 30 days from date of purchase. -
We stock Voltex HeNe laser power supplies known for their high efficiency, reliability, and rugged construction. Hook-up diagram included. Specifications: Input Voltage: 110 / 220 VAC, 50 to 60 Hz. Output Voltage: 3200 to 4000 VDC. Output Current: 8 to 11 mA, user adjustable. Trigger Voltage: 12 KV Input Leads: 10", 22 AWG. Flying. Output Leads: Alden high voltage connector or equivalent. Dimensions: 4.3" X 3.3" X 1.3" Mounting holes: 2.3" center spacing. Warranty: 30 days from date of purchase. -
These are good used hard sealed laser heads for your OEM, replacement, or experimental needs. Heads have integral ballast resistor. Other types of heads may be available. Please call for more information. SPECIFICATIONS:Mfg. & Part Number: Melles Griot, model 05-LHP-153, Xerox part number: 122E00341. Output Power: 5.0 mW minimum 6.3 mW typical. Wavelength: 632.8 nm RED Polarization: Linear polarized 500:1 Mode: TEMoo Beam Diameter: 1.0 mm Beam Divergence: 1.1 mRads. Operating Voltage: 2450 VDC. Start Voltage: 10KV. Operating Current Range: 6.0 to 7.0 mA, 6.5 mA Ideal. Input Lead: Male Alden connector with a 305 mm long cord, and external case ground connector. Recommended Power Supply: E-21, F-22, DG-22 Dimensions: 381 mm long x 44.5 mm diameter. Warranty: Limited 30 days from date of purchase.
-
New voltex inc lab style Helium Neon laser power supply. Features include:- Universal AC power input: 100 to 240 VAC 50/60 Hz.
- CDRH compliance: Key switch, pilot light, turn-on delay, and remote interlock.
- CE compliance
- Compact size: only 1.5 x 4.13 x 7.88 inches ( 38 x 150 x 200mm)
- High efficiency: >85% conversion efficiency for cool operation and long life.
- Internal bleed-down resistor: to reduce shock hazard from the laser head.
-
New voltex inc lab style Helium Neon laser power supply. Features include:
- Universal AC power input: 100 to 240 VAC 50/60 Hz.
- CDRH compliance: Key switch, pilot light, turn-on delay, and remote interlock.
- CE compliance
- Compact size: only 1.5 x 4.13 x 7.88 inches ( 38 x 150 x 200mm)
- High efficiency: >85% conversion efficiency for cool operation and long life.
- Internal bleed-down resistor: to reduce shock hazard from the laser head.
-
Melles Griot Lab style Helium Neon laser power supply model 05-LPL-944-080 or equivalent. These are used units, tested and in good condition. Power supplies include: 1 key, remote interlock connector, and a power cord for North America. Please call or email us for more information. Equivalent model numbers: Melles Griot: 25-LHP-928-249, 25-LHR-928-249, 25-LHP-928-230, 25-LHR-928-230 Coherent: 31-2488-000 Laser heads it will operate Melles Griot models: 05- LHP-827, 05-LHR-827, 05-LHP-927, 05-LHR-927, 05-LHP-928, 05-LHR-928, 25-LHP-928-xxx, 25-LHR-928-xxx. Coherent models: 31-2140, 31-2157 Specifications: Input: 115 / 230 VAC 50-400 Hz. Output: 4400-5300 VDC, 7-9mA* (factory preset at 8.0mA) *Output current adjustable via internal trim potentiometer.* ** Please contact us if you would like us to preset the current to a specified amount.** Start voltage: >15KV. CDRH delay: 3 to 5 seconds. Defeatable by cutting internal violet wire loop. Output connector: Alden high voltage connector or equivalent. Remote interlock: Jones plug type series circuit. Jumpered connector included. Dimensions: 2.1 x 6.3 x 9.5 inches ( 54 x 161 x 242 mm). Warranty: 30 days from date of purchase.
-
New voltex inc lab style Helium Neon laser power supply. Features include:- Universal AC power input: 100 to 240 VAC 50/60 Hz.
- CDRH compliance: Key switch, pilot light, turn-on delay, and remote interlock.
- CE compliance
- Compact size: only 1.5 x 4.13 x 7.88 inches ( 38 x 150 x 200mm)
- High efficiency: >85% conversion efficiency for cool operation and long life.
- Internal bleed-down resistor: to reduce shock hazard from the laser head.
-
Out of stock
These are lightly used, hard sealed laser heads for your OEM, replacement, or experimental needs. Heads have integral ballast resistor, mechanical shutter, and mounting holes for accessories. Other types of heads may be available. Please call for more information.Specifications:
Mfg./part#: Melles Griot model 05-LGP-151-234. Output Power: 0.5 mW minimum 0.8 mW typical Note: A green HeNe will appear 4 times as bright as a red HeNe of the same output power. Wavelength: 543.5 nm GREEN Polarization: Linear, >500:1 Mode: TEMoo Beam Diameter: 0.77 mm Beam Divergence: 0.90 mRads. Aperture Mount: 4x 4-40 tapped holes, 25.4mm square spacing. Operating Voltage: 2390 VDC. Start Voltage: 10 KV. Operating Current Range: 6 to 7 mA, 6.5 mA Ideal. Input Leads: Male Alden connector with a 229 mm long cord. (extension cord available) Recommended Power Supply: LAB-S-22, DG-22, E-21, F-22. Dimensions: 396 mm long x 44.5 mm diameter.
-
Voltex Inc. Lab style Helium Neon laser power supply. Features include: Universal AC power input: 100-120 / 200-240 VAC 50/60 Hz. CDRH compliance: Key switch, pilot light, turn-on delay, and remote interlock. Compact size: only 1.5 x 4.13 x 7.88 inches ( 38 x 150 x 200mm) High efficiency: >85% conversion efficiency for cool operation and long life. Internal bleed-down resistor: to reduce shock hazard from the laser head. Specifications: Input: 100-120 / 200-240 VAC 50/60 Hz. Uses business machine type AC cord. Includes an AC cord with a North American standard connector. Output: 3200-4000 VDC, 5 to 9.5 mA* (factory preset at 6.5mA) *Output current adjustable via internal trim potentiometer.* ** Please contact us if you would like us to preset the current to a specified amount.** Start voltage: >12KV. Line filtering: Internal EMI line filter. Output fault protection: Open circuit, short circuit, and arc conditions. CDRH delay: 3 to 5 seconds. Defeatable by cutting internal violet wire loop. Output connector: Alden high voltage connector or equivalent. Remote interlock: Jones plug type low voltage series circuit. Jumpered connector included. Dimensions: 1.5 x 4.13 x 7.88 inches ( 38 x 150 x 200mm). Warranty: Limited 1 year from date of purchase. -
New, old stock, hard sealed laser heads for your OEM, replacement, or experimental needs. Heads have integral ballast resistor, mechanical shutter, and mounting holes for accessories. Other types of heads may be available. Please call for more information.Specifications: Output Power: 16 mW minimum, 20 mW typical Wavelength: 632.8nm RED Polarization: Random Mode: Multi-mode Beam Diameter: 1.47 mm Beam Divergence: 1.4 mRads. Aperture Mount: 4x 3-0.5 mm tapped holes 25mm square spacing. Operating Voltage: 2480 VDC. Start Voltage: 10KV. Operating Current Range: 6.5 to 7 mA. Input Leads: Male Alden connector with a 150 mm long cord. (extension cords available) Recommended Power Supply: LPM-903-070, DG-28 , LAB-S-28 Dimensions: 510 mm long x 44.5 diameter. Warranty: Limited 30 days from date of purchase.
-
These are rebuilt heads with new laser tubes installed for your OEM, replacement, or experimental needs. Heads have integral ballast resistor, mechanical shutter, and mounting holes for accessories. Other types of heads may be available. Please call for more information.
Specifications:
Output Power: 1.9 mW minimum, 2.4 mW typical, 3.5 mW maximum. Wavelength: 632.8nm RED Polarization: Linear, 500:1 Mode: TEMoo Beam Diameter: 0.80 mm Beam Divergence: 1.35 mRads. Aperture Mount: 4x 4-40 threaded holes, 25.4 mm Square spacing. Operating Voltage: 1800 VDC. Start Voltage: 10KV. Operating Current Range: 5.5 to 6.5 mA, 6.0 mA Ideal. Input Lead: Male Alden connector with a 229 mm long cord. (extension cord available) Recommended Power Supply: LAB-S-22, DG-22, E-21, F-22. Dimensions: 274 mm long 44.5 mm diameter. Warranty: Limited 30 days from date of purchase.
-
These are new, hard sealed laser heads for your OEM, replacement, or experimental needs. Heads have integral ballast resistor, mechanical shutter, and mounting holes for accessories. Other types of heads may be available. Please call for more information.
Specifications:
Output Power: 12 mW minimum 14mW typical Wavelength: 632.8nm RED Polarization: Random (linear polarization may be availible. Please email us for availability) Mode: TEMoo Beam Diameter: 0.80m Beam Divergence: 1.0 mRads. Aperture Mount: 4x 4-40 tapped holes 25.4 mm square spacing. Operating Voltage: 3200 VDC. Start Voltage: 12KV. Operating Current Range: 6.0 to 7.0 mA, 6.5mA Ideal. Input Lead: Male Alden connector with a 229 mm long cord. (extension cord available) Recommended Power Supply: DG-28, LAB-S-28 Dimensions: 483 mm long x 44.5 mm diameter. Warranty: Limited 30 days from date of purchase. -
These are new, hard sealed laser heads for your OEM, replacement, or experimental needs. Heads have integral ballast resistor, mechanical shutter, and mounting holes for accessories. Other types of heads may be available. Please call for more information.Specifications:
Output Power: 0.5 mW minimum 0.8 mW typical Wavelength: 1523 nm INFRARED Polarization: Random, (linear 500:1 may be available, please call or email for availability) Mode: TEMoo Beam Diameter: 0.83 mm Beam Divergence: 2.31 mRads. Aperture Mount: 4x 4-40 tapped holes 25.4 mm square spacing. Operating Voltage: 2000 VDC. Start Voltage: 10 KV. Operating Current Range: 5.5 to 6.5 mA, 6.0 mA Ideal. Input Lead: Male Alden connector with 1.8 meter long cord. Recommended Power Supply: LAB-S-22, DG-22, E-21, F-22. Dimensions: 401 mm long x 44.5 mm diameter. Warranty: Limited 30 days from date of purchase.
-
These are used, hard sealed laser heads for your OEM, replacement, or experimental needs. Heads have integral ballast resistor, mechanical shutter, and mounting holes for accessories. Other types of heads may be available. Please call for more information.
Specifications: Output Power: 17 mW minimum, 19 mW typical Wavelength: 632.8nm RED Polarization: Linear 500:1 Mode: TEMoo Beam Diameter: 0.80m Beam Divergence: 1.0 mRads. Aperture Mount: 4x 3-0.5 mm tapped holes 25mm square spacing. Operating Voltage: 3800 VDC. Start Voltage: 12KV. Operating Current Range: 6.5 to 7 mA. Input Leads: Male Alden connector with a 203 mm long cord. (extension cords available) Recommended Power Supply: 380T-2700-3900-6.5-4, T-36, LAB-ST-36. Dimensions: 660 mm long x 44.5 diameter. Warranty: Limited 30 days from date of purchase.
-
These are new, hard sealed laser heads for your OEM, replacement, or experimental needs. Heads have integral ballast resistor, mechanical shutter, and mounting holes for accessories. Other types of heads may be available. Please call for more information.
Specifications: Output Power: 7.0 mW minimum 8.0 mW typical Wavelength: 632.8nm RED Polarization: Random (linear polarization may be available on request) Mode: TEMoo Beam Diameter: 0.80mm Beam Divergence: 1.0 mRads. Aperture Mount: 4x 4-40 tapped holes 25.4 mm square spacing. Operating Voltage: 2800 VDC. Start Voltage: 10KV. Operating Current Range: 6 to 7 mA, 6.5 mA Ideal. Input Leads: Male Alden connector with 225 mm cord length. (extension cord available) Recommended Power Supply: LAB-S-28, DG-28. Dimensions: 431 mm long 44.5 mm diameter. Warranty: Limited 30 days from date of purchase. -
Out of stock
These are new, hard sealed laser heads for your OEM, replacement, or experimental needs. Heads have integral ballast resistor, mechanical shutter, and mounting holes for accessories. Other types of heads may be available. Please call for more information.
Specifications:
Output Power: 5.0 mW minimum 6.4 mW typical Wavelength: 632.8nm RED Polarization: Linear 500:1 (Random may be available, please call or email for availability) Mode: TEMoo Beam Diameter: 0.80mm Beam Divergence: 1.0 mRads. Aperture Mount: 4x 4-40 tapped holes 25.4 mm square spacing. Operating Voltage: 2450 VDC. Start Voltage: 10KV. Operating Current Range: 6 to 7 mA, 6.5 mA Ideal. Input Lead: Male Alden connector with a 178 mm long cord. (extension cord available) Recommended Power Supply: LAB-S-22, DG-22, E-21, F-22. Dimensions: 401 mm long x 44.5 mm diameter. Warranty: Limited 30 days from date of purchase.
