HeNe Lasers

05-LHP-120-287, 2mW 633nm Red HeNe Laser Tube Assembly

$250.00

These are new, hard sealed laser tubes for your OEM replacement or experimental needs. This assembly includes the laser tube mounted on a bracket with the ballast resistor and Alden high voltage connector inplace.
Specifications:

MFG / Model: Melles Griot 05-LHP-120-287 Output Power: 2.0 mW minimum 2.8 mW typical 3.9 mW maximum. Wavelength: 632.8 nm RED Polarization: linear / 500:1 Mode: TEMoo Beam Diameter: 0.59 mm Beam Divergence: 1.35 mRads Light Exit: Cathode end of tube. Operating Voltage: 2000 VDC Start Voltage: 10KV. Operating Current: 6.5 mA Recommended Power Supply: DG-22, E-21, LAB-S-22. Dimensions: 10.4 x 2 x 2 inches Warranty: Limited 30 days from date of purchase.

Add to cart Details
Out of stock

Melles Griot 05-LHP-123-496 HeNe Head

$1,595.00

These are lightly used, Helium Neon laser heads for your OEM replacement or experimental needs. Other types of heads may be available. Please call or email for more information. Specifications:
MFG / Model: Melles Griot 05-LHP-123-496 Output Power: 1.8 mW minimum, 2.4 mW typical Wavelength: 632.8nm RED Polarization: Linear, 500:1 Mode: TEMoo Beam Diameter: 0.63 mm Beam Divergence: 1.28 mRads. Aperture Mount: 4x 4-40 tapped holes, 25.4 mm square spacing. Operating Voltage: 1750 VDC. Start Voltage: 10 KV. Operating Current: 6.5 mA Input Lead: Male Alden connector with a 229 mm long cord. (extension cord available) Recommended Power Supply: LAB-S-22, DG-22, E-21, F-22. Dimensions: 272 mm long x 44.5 mm diameter. Warranty: Limited 30 days from date of purchase.

Details
50K Ohm 10 Watt Ballast Resistor

$5.00

A ballast resistor is necessary to run a bare laser tube. (Lasers that are in a metal head will have one built in.) It must be placed in series with the anode lead within 3" of the tube. Dale CW-10, 50K ohm, 10 Watt wire wound ballast resistor. Recommended for large HeNe laser tubes that operate up to 14mA.

Add to cart Details
150 uW 543nm Green HeNe Laser Tube LGR-120

$149.00

These are new, hard sealed laser tubes for your OEM, replacement, or experimental needs. Other types of tubes may be available. Please email us for more information.
SPECIFICATIONS:
Manufacture / Part Number: Melles Griot, model LGR120 Output Power: 150 uW typical, Wavelength: 543.5 nm GREEN Polarization: Random Mode: TEMoo Beam Diameter: 0.85 mm Beam Divergence: 1.2 mRads. Light Exit: Cathode end of tube. Operating Voltage: 1650 VDC (with 75K ballast). Start Voltage: 10KV. Operating Current Range: 4.0 -6.0mA , 5.0 mA Ideal. Recommended Ballast Resistor: 75K Ohms, 5 Watt. (Add in series to the anode lead within 3" of the tube.) Recommended Power Supply: E-21, F-22, DG-22, LAB-S-22. Dimensions: 8.5" long x 1.5" diameter. Warranty: Limited 30 days from date of purchase.

Add to cart Details
2mW 594nm Yellow HeNe Laser System

$1,495.00
Helium Neon laser system that includes:

Cylindrical laser head, (refurbished)

Lab style power supply

Alden extension cable

Users manual

Specifications: Output Power: 1.3 mW minimum 2mW typical Wavelength: 594.1 nm YELLOW Polarization: Random (linear polarization may be available on request) Mode: TEMoo Beam Diameter: 0.88 mm Beam Divergence: 1.0 mRads. Input Voltage: 110 / 220 VAC, 50-60 Hz. Dimensions: Head: 457 mm long 44.5 mm dia. Power Supply: 204 mm long 107 mm wide 36 mm tall Warranty: Limited 1 year from date of purchase. CDRH Class: 3a
Add to cart Details
AC HeNe Laser Power Supply for 20″ to 27″ Heads

$449.00

We stock Voltex HeNe laser power supplies known for their high efficiency, reliability, and rugged construction. Hook-up diagram included. Specifications: Input Voltage: 110 / 220 VAC, 50 to 60 Hz. Output Voltage: 3200 to 4000 VDC. Output Current: 5 to 7 mA, user adjustable. Trigger Voltage: 12 KV Input Leads: 10", 22 AWG. Flying. Output Leads: Alden high voltage connector or equivalent. Dimensions: 4.3" X 3.3" X 1.3" Mounting holes: 2.3" center spacing. Warranty: 30 days from date of purchase.

Add to cart Details
05-LHR-120-286, 2mW 633nm Red HeNe Laser Tube Assembly

$250.00

These are new, hard sealed laser tubes for your OEM replacement or experimental needs. This assembly includes the laser tube mounted on a bracket with the ballast resistor and Alden high voltage connector inplace.
Specifications:

MFG / Model: Melles Griot 05-LHR-286 Output Power: 2.0 mW minimum 2.8 mW typical 3.9 mW maximum. Wavelength: 632.8 nm RED Polarization: random Mode: TEMoo Beam Diameter: 0.59 mm Beam Divergence: 1.35 mRads Light Exit: Cathode end of tube. Operating Voltage: 2000 VDC Start Voltage: 10KV. Operating Current: 6.5 mA Recommended Power Supply: DG-22, E-21, LAB-S-22. Dimensions: 10.4 x 2 x 2 inches Warranty: Limited 30 days from date of purchase.

Add to cart Details
Out of stock

JDSU Uniphase HeNe Laser Tube model 1018

$295.00

These are new, old stock hard sealed laser tubes for your OEM, replacement, or experimental needs. Other types of tubes may be available. Please email us for more information. SPECIFICATIONS: Manufacture / Part Number: Uniphase model 1018 Output Power: 2.0mW minimum Wavelength: 632.8 nm RED Polarization: Random Mode: TEMoo Beam Diameter: 0.55 mm Beam Divergence: 1.5 mRads. Light Exit: Cathode end of tube. Operating Voltage: 1700 VDC (with 68 K ballast). Start Voltage: 8 KV. Operating Current: 4.5 mA Ideal. Recommended Ballast Resistor: 68 K Ohms, 2 Watt. (Add in series to the anode lead within 3" of the tube.) Recommended Power Supply: E-15, DG-15 Dimensions: 7.5" (191 mm) long x 1.0" (25.4 mm) diameter. Warranty: Limited 30 days from date of purchase.

Details
AC HeNe Laser Power Supply Melles Griot 05-LPM-900-045

$195.00

The Melles Griot model 05-LPM-900-045 will operate most 6 to 8 inch long HeNe tubes or heads. These are new units and have Japanese standard wire color code. Specifications: Input Voltage: 100/200 VAC ±10%, 50 to 400 Hz. Output Voltage: 1150 to 1350 VDC. Output Current: 4.5 mA, fixed Trigger Voltage: 10 KV Input Leads: 12 inches, 22 AWG. Flying. Output Leads: Alden high voltage connector Dimensions: 4.3 x 3.0 x 1.2 inches (109 x 76 x 31 mm) Mounting holes: 2.3 and 2.5 inch center spacing.
Features:
4 second Turn-on delay (defeat by cutting violet wire loop) Alden high voltage output connector RoHS compliant

Add to cart Details
10mW 633nm Red HeNe Head

$1,095.00

These are new, hard sealed laser heads for your OEM, replacement, or experimental needs. Heads have integral ballast resistor, mechanical shutter, and mounting holes for accessories. Other types of heads may be available. Please call for more information.
Specifications: Output Power: 7.0 mW minimum 8.0 mW typical Wavelength: 632.8nm RED Polarization: Random (linear polarization may be available on request) Mode: TEMoo Beam Diameter: 0.80mm Beam Divergence: 1.0 mRads. Aperture Mount: 4x 4-40 tapped holes 25.4 mm square spacing. Operating Voltage: 2800 VDC. Start Voltage: 10KV. Operating Current Range: 6 to 7 mA, 6.5 mA Ideal. Input Leads: Male Alden connector with 225 mm cord length. (extension cord available) Recommended Power Supply: LAB-S-28, DG-28. Dimensions: 431 mm long 44.5 mm diameter. Warranty: Limited 30 days from date of purchase.

Add to cart Details
20mW 633nm Red HeNe Head

$995.00

These are used, hard sealed laser heads for your OEM, replacement, or experimental needs. Heads have integral ballast resistor, mechanical shutter, and mounting holes for accessories. Other types of heads may be available. Please call for more information.
Specifications: Output Power: 17 mW minimum, 19 mW typical Wavelength: 632.8nm RED Polarization: Linear 500:1 Mode: TEMoo Beam Diameter: 0.80m Beam Divergence: 1.0 mRads. Aperture Mount: 4x 3-0.5 mm tapped holes 25mm square spacing. Operating Voltage: 3800 VDC. Start Voltage: 12KV. Operating Current Range: 6.5 to 7 mA. Input Leads: Male Alden connector with a 203 mm long cord. (extension cords available) Recommended Power Supply: 380T-2700-3900-6.5-4, T-36, LAB-ST-36. Dimensions: 660 mm long x 44.5 diameter. Warranty: Limited 30 days from date of purchase.

Add to cart Details
Female Alden Style Connector with Coax

$24.00

Female Alden style, high voltage connector with 6 feet (1.8M) of coax. Coax cable is rated at 15 KVDC.

Add to cart Details
High Current AC HeNe Laser Power Supply for 20″ to 27″ Heads

$449.00

We stock Voltex HeNe laser power supplies known for their high efficiency, reliability, and rugged construction. Hook-up diagram included. Specifications: Input Voltage: 110 / 220 VAC, 50 to 60 Hz. Output Voltage: 3200 to 4000 VDC. Output Current: 8 to 11 mA, user adjustable. Trigger Voltage: 12 KV Input Leads: 10", 22 AWG. Flying. Output Leads: Alden high voltage connector or equivalent. Dimensions: 4.3" X 3.3" X 1.3" Mounting holes: 2.3" center spacing. Warranty: 30 days from date of purchase.

Add to cart Details
Lab Style Power Supply 6 to 9 Inch Heads

$695.00
New voltex inc lab style Helium Neon laser power supply. Features include:

Universal AC power input: 100 to 240 VAC 50/60 Hz.

CDRH compliance: Key switch, pilot light, turn-on delay, and remote interlock.

CE compliance

Compact size: only 1.5 x 4.13 x 7.88 inches ( 38 x 150 x 200mm)

High efficiency: >85% conversion efficiency for cool operation and long life.

Internal bleed-down resistor: to reduce shock hazard from the laser head.

Specifications: Input: 100 to 240 VAC 50/60 Hz. Uses business machine type AC cord. Includes an AC cord with a North American standard connector. Output: 1300-1900 VDC, 3 to 6 mA* (factory preset at 5 mA) *Output current adjustable via internal trim potentiometer.* ** Please contact us if you would like us to preset the current to a specified amount.** Start voltage: >10KV. Line filtering: Internal EMI line filter. Output fault protection: Open circuit, short circuit, and arc conditions. CDRH delay: 3 to 5 seconds. (Defeatable by cutting internal violet wire loop) Output connector: Alden high voltage connector or equivilent. Remote interlock: Jones plug type low voltage series circuit. Jumpered connector included. Dimensions: 1.5 x 4.13 x 7.88 inches ( 38 x 150 x 200mm). Warranty: Limited 1 year from date of purchase.
Add to cart Details
1mW 1523nm Infrared HeNe Head

$995.00

These are new, hard sealed laser heads for your OEM, replacement, or experimental needs. Heads have integral ballast resistor, mechanical shutter, and mounting holes for accessories. Other types of heads may be available. Please call for more information.
Specifications:

Output Power: 0.5 mW minimum 0.8 mW typical Wavelength: 1523 nm INFRARED Polarization: Random, (linear 500:1 may be available, please call or email for availability) Mode: TEMoo Beam Diameter: 0.83 mm Beam Divergence: 2.31 mRads. Aperture Mount: 4x 4-40 tapped holes 25.4 mm square spacing. Operating Voltage: 2000 VDC. Start Voltage: 10 KV. Operating Current Range: 5.5 to 6.5 mA, 6.0 mA Ideal. Input Lead: Male Alden connector with 1.8 meter long cord. Recommended Power Supply: LAB-S-22, DG-22, E-21, F-22. Dimensions: 401 mm long x 44.5 mm diameter. Warranty: Limited 30 days from date of purchase.

Add to cart Details
Out of stock

12 VDC HeNe Power Supply Melles Griot 05-PSAE-829-045

$229.00

New Melles Griot model 05-PSAE-829-045 DC input power supply
Specifications:
Input: 10 to 14 VDC, 1.2 Amps. 16 Watts max Output: 1100-1500 VDC, 4.5 mA fixed. Start voltage: >10KV Dimensions: 4.2" x 3.3" x 1.25" (107 x 84 x 32mm)
Features:
Low Noise Alden high voltage output connector.

Details
Beam Expander / Collimator 2-8x adjustable 633-980nm

$125.00

High quality German made beam expander / collimating lens system, focusable and adjustable from 2x to 8x magnification. The anti-reflective coatings are optimized for 633 to 980nm. Dimensions are 150mm long by 42mm dia. max. Mounting dia. (center section) is 37.6mm. .

Add to cart Details
Melles Griot Lab Style Power Supply 05-LPL-944-080

$695.00

Melles Griot Lab style Helium Neon laser power supply model 05-LPL-944-080 or equivalent. These are used units, tested and in good condition. Power supplies include: 1 key, remote interlock connector, and a power cord for North America. Please call or email us for more information. Equivalent model numbers: Melles Griot: 25-LHP-928-249, 25-LHR-928-249, 25-LHP-928-230, 25-LHR-928-230 Coherent: 31-2488-000 Laser heads it will operate Melles Griot models: 05- LHP-827, 05-LHR-827, 05-LHP-927, 05-LHR-927, 05-LHP-928, 05-LHR-928, 25-LHP-928-xxx, 25-LHR-928-xxx. Coherent models: 31-2140, 31-2157 Specifications: Input: 115 / 230 VAC 50-400 Hz. Output: 4400-5300 VDC, 7-9mA* (factory preset at 8.0mA) *Output current adjustable via internal trim potentiometer.* ** Please contact us if you would like us to preset the current to a specified amount.** Start voltage: >15KV. CDRH delay: 3 to 5 seconds. Defeatable by cutting internal violet wire loop. Output connector: Alden high voltage connector or equivalent. Remote interlock: Jones plug type series circuit. Jumpered connector included. Dimensions: 2.1 x 6.3 x 9.5 inches ( 54 x 161 x 242 mm). Warranty: 30 days from date of purchase.

Add to cart Details
Lab Style Power Supply for 20 to 27 Inch Heads

$795.00

Voltex Inc. Lab style Helium Neon laser power supply. Features include: Universal AC power input: 100-120 / 200-240 VAC 50/60 Hz. CDRH compliance: Key switch, pilot light, turn-on delay, and remote interlock. Compact size: only 1.5 x 4.13 x 7.88 inches ( 38 x 150 x 200mm) High efficiency: >85% conversion efficiency for cool operation and long life. Internal bleed-down resistor: to reduce shock hazard from the laser head. Specifications: Input: 100-120 / 200-240 VAC 50/60 Hz. Uses business machine type AC cord. Includes an AC cord with a North American standard connector. Output: 3200-4000 VDC, 5 to 9.5 mA* (factory preset at 6.5mA) *Output current adjustable via internal trim potentiometer.* ** Please contact us if you would like us to preset the current to a specified amount.** Start voltage: >12KV. Line filtering: Internal EMI line filter. Output fault protection: Open circuit, short circuit, and arc conditions. CDRH delay: 3 to 5 seconds. Defeatable by cutting internal violet wire loop. Output connector: Alden high voltage connector or equivalent. Remote interlock: Jones plug type low voltage series circuit. Jumpered connector included. Dimensions: 1.5 x 4.13 x 7.88 inches ( 38 x 150 x 200mm). Warranty: Limited 1 year from date of purchase.

Add to cart Details
Out of stock

Laser Drive 314T-2300-6-4 AC HeNe Laser Power Supply

$195.00

Laser Drive inc. model number 314T-2300-6-4 Specifications: Input Voltage: 115 / 230 VAC, 50 to 400 Hz. Output Voltage: 2300 VDC. ∓200V Output Current: 6.0 mA Trigger Voltage: >10 KV Input Leads: 7", 22 AWG. Flying. Output Leads: Alden high voltage connector. CDRH delay: 3 to 5 seconds. (Defeatable by cutting violet wire loop) Dimensions: 4.3" x 3" x 1.2" (110 x 76 x 30 mm) Mounting holes: 0.15 diameter x3. 2.3" x 2.5" center spacing. Warranty: 30 days from date of purchase. RoHS Compliant

Details
Melles Griot 05LPM-914-065 AC HeNe Laser Power Supply

$195.00

Melles Griot model number 05-LPM-914-065 This is a new power supply with a TTL disable function. It will operate a typical 8 to 11 inch long HeNe laser. Hook-up diagram included. Specifications: Input Voltage: 115 / 230 VAC, 50 to 400 Hz. Output Voltage: 1550-1950 VDC Output Current: 5 to 7 mA. adjustable via trim pot. preset at 6.5 mA Trigger Voltage: >10 KV Input Leads: 12", 22 AWG. Flying. Output Leads: 7" with Alden HV connector CDRH delay: None TTL function: 0 VDC = ON, 5 VDC = OFF White wire with yellow stripe:+, White wire with black stripe:- Dimensions: 4.25" X 3.3" X 1.25" (108 x 84 x 32 mm) Mounting holes: 0.15" diameter 3x, 2.5" x 2.3" center spacing. Warranty: 30 days from date of purchase.

Add to cart Details
Laser Drive Inc. AC HeNe Laser Power Supply 314S-1250-4-1

$195.00

Laser Drive Inc. model number 314S-1250-4-1 This is a new power supply with USA standard wire colors. It will operate a typical 5 to 7 inch long HeNe laser. Hook-up diagram included. Specifications: Input Voltage: 115 / 230 VAC, 50 to 400 Hz. Output Voltage: 1250 VDC ±200 VDC Output Current: 4.0 mA Trigger Voltage: >10 KV Input Leads: 12", 22 AWG. Flying. Output Leads: 12" Flying. CDRH delay: None Dimensions: 4.25" X 3.3" X 1.25" (108 x 84 x 32 mm) Mounting holes: 0.15" diameter 3x, 2.5" x 2.3" center spacing. Warranty: 30 days from date of purchase.

Add to cart Details
Laser Drive Inc. AC HeNe Laser Power Supply 380T-3900-7-4

$229.00

Laser Drive Inc. model number 380T-2900-7-4 This is a new power supply with Japanese standard wire colors. It will operate a typical 18 to 25 inch long HeNe laser. Hook-up diagram included. Specifications: Input Voltage: 100-120 / 200-230 VAC, 50 to 400 Hz. Output Voltage: 3900 VDC ±200 VDC Output Current: 7.0 mA ±1.0mA user adjustable via trim pot. Preset at 7.0 mA Trigger Voltage: >12 KV Input Leads: 12", 22 AWG. Flying. Output Leads: 12", Alden high voltage connector. CDRH delay: 4 seconds. (Defeatable by cutting violet wire loop) Dimensions: 7" X 2.4" X 1.4" (178 x 61 x 36 mm) Mounting holes: 0.15" diameter 3x, 2.95" x 1.8" center spacing. Warranty: 30 days from date of purchase.

Add to cart Details
Melles Griot 05-LHR-640 HeNe Laser Tube

$250.00

These are new, old stock hard sealed laser tubes for your OEM, replacement, or experimental needs. Other types of tubes may be available. Please email us for more information. SPECIFICATIONS: Manufacture / Part Number: Melles Griot, model 05-LHR-640 Output Power: 0.5 mW minimum Wavelength: 632.8 nm RED Polarization: Random Mode: TEMoo Beam Diameter: 0.46 mm Beam Divergence: 1.70 mRads Light Exit: Cathode end of tube. Operating Voltage: 1180 VDC (with 68 K ballast) Start Voltage: 8 KV Operating Current: 3.5-4.8mA, 4.5mA Ideal Recommended Ballast Resistor: 68 K Ohms, 3 Watt (Add in series to the anode lead within 3" of the tube.) Recommended Power Supply: E-15, DG-15 Dimensions: 5.0" (127 mm) long x 1.0" (25.4 mm) diameter Warranty: Limited 30 days from date of purchase.

Add to cart Details