-
These are good used, hard sealed laser tubes for your OEM, replacement, or experimental needs. Other types of tubes may be available. Please email us for more information. Specifications: Output Power: 4.5 mW minimum 6.0 mW typical 8.0 mW maximum. Wavelength: 632.8 nm RED Polarization: Linear 500:1, (random may be available, please call or email for availability) Mode: TEMoo Beam Diameter: 0.80 mm Beam Divergence: 1.0 mRads. Light Exit: Cathode end of tube. Operating Voltage: 2390 VDC (with 75K ballast). Start Voltage: 10KV. Operating Current Range: 6 to 7 mA, 6.5 mA Ideal. Recommended Ballast Resistor: 75K Ohms, 5 Watt. (Add in series to the anode lead within 3" of the tube.) Recommended Power Supply: DG-22, E-21, LAB-S-22. Dimensions: 13.8" long x 1.45" diameter. Warranty: Limited 30 days from date of purchase. -
A ballast resistor is necessary to run a bare laser tube. (Lasers that are in a metal head will have one built in.) It must be placed in series with the anode lead within 3" of the tube. 68K ohm, 3 Watt metal oxide ballast resistor. Recommended for HeNe laser tubes that operate on 6.5mA or less -
A ballast resistor is necessary to run a bare laser tube. (Lasers that are in a metal head will have one built in.) It must be placed in series with the anode lead within 3" of the tube. 75K ohm, 5 Watt wire wound ballast resistor. Recommended for HeNe laser tubes that operate on 8mA or less. -
We stock Voltex Hene laser power supplies known for their high efficiency, reliability, and rugged construction. Hook-up diagram included. Specifications: Input Voltage: 110 / 220 VAC, 50 to 60 Hz. Output Voltage: 2400 to 3200 VDC. Output Current: 5 to 7 mA, user adjustable. Trigger Voltage: 10 KV Input Leads: 10", 22 AWG. Flying. Output Leads: Alden high voltage connector or equivalent. Dimensions: 3.5" X 2.5" X 1.0" Mounting holes: 2.3" center spacing. Warranty: 30 days from date of purchase. -
Laser Drive inc. model number 380T-2700-3900-6.5-4 This new, re-labeled power supply will operate a typical 18 to 25 inch long HeNe laser. Hook-up diagram included. Specifications: Input Voltage: 100-120 / 200-230 VAC, 50 to 400 Hz. Output Voltage: 2700 to 3900 VDC. Output Current: 5.5 to 7.0 mA user adjustable. Preset at 6.5 mA Trigger Voltage: >12 KV Input Leads: 12", 22 AWG. Flying. Output Leads: 12", Alden high voltage connector. CDRH delay: 4 seconds. (Defeatable by cutting violet wire loop) Dimensions: 7" X 2.4" X 1.4" (178 x 61 x 36 mm) Mounting holes: 0.15" diameter x 3, 2.95" x 1.8" center spacing. Warranty: 30 days from date of purchase. -
We stock Voltex HeNe laser power supplies known for their high efficiency, reliability, and rugged construction. Hook-up diagram included. Specifications: Input Voltage: 110 / 220 VAC, 50 to 60 Hz. Output Voltage: 3200 to 4000 VDC. Output Current: 5 to 7 mA, user adjustable. Trigger Voltage: 12 KV Input Leads: 10", 22 AWG. Flying. Output Leads: Alden high voltage connector or equivalent. Dimensions: 4.3" X 3.3" X 1.3" Mounting holes: 2.3" center spacing. Warranty: 30 days from date of purchase. -
We stock Voltex HeNe laser power supplies known for their high efficiency, reliability, and rugged construction. Hook-up diagram included. Specifications: Input Voltage: 110 / 220 VAC, 50 to 60 Hz. Output Voltage: 1300 to 1900 VDC. Output Current: 3 to 6 mA, user adjustable. Trigger Voltage: >8 KV Input Leads: 10", 22 AWG. Flying. Output Leads: Alden high voltage connector or equivalent. Dimensions: 3.5" X 2.5" X 1.0" Mounting holes: 2.3" center spacing. Warranty: 30 days from date of purchase. -
We stock Voltex Hene laser power supplies known for their high efficiency, reliability, and rugged construction. Hook-up diagram included. Specifications: Input Voltage: 110 / 220 VAC, 50 to 60 Hz. Output Voltage: 1900 to 2600 VDC. Output Current: 4 to 7 mA, user adjustable. Trigger Voltage: 10 KV Input Leads: 10", 22 AWG. Flying. Output Leads: Alden high voltage connector or equivalent. Dimensions: 3.5" X 2.5" X 1.0" Mounting holes: 2.3" center spacing. Warranty: 30 days from date of purchase. -
The Melles Griot model 05-LPM-900-045 will operate most 6 to 8 inch long HeNe tubes or heads. These are new units and have Japanese standard wire color code. Specifications: Input Voltage: 100/200 VAC ±10%, 50 to 400 Hz. Output Voltage: 1150 to 1350 VDC. Output Current: 4.5 mA, fixed Trigger Voltage: 10 KV Input Leads: 12 inches, 22 AWG. Flying. Output Leads: Alden high voltage connector Dimensions: 4.3 x 3.0 x 1.2 inches (109 x 76 x 31 mm) Mounting holes: 2.3 and 2.5 inch center spacing.Features:
4 second Turn-on delay (defeat by cutting violet wire loop) Alden high voltage output connector RoHS compliant -
Out of stock
The Melles Griot model 05-LPM-902-065 will operate most 11 to 15 inch long HeNe tubes or heads. These are new units with European standard wire color code. Specifications: Input Voltage: 115 / 230 VAC ±10%, 50 to 400 Hz. Output Voltage: 1850 to 2450 VDC. Output Current: 5.5 to 7 mA, preset at 6.5 mA. Trigger Voltage: >10 KV Input Leads: 8 inches, 22 AWG. Flying. Output Leads: Alden high voltage connector Dimensions: 4.3 x 3.0 x 1.2 inches (109 x 76 x 31 mm) Mounting holes: 2.3 and 2.5 inch center spacing.Features:
4 second Turn-on delay (defeat by cutting violet wire loop) Alden high voltage output connector. Output current adjustable with onboard trim-pot -
The Melles Griot model 05-LPM-905-065 will operate most 11 to 15 inch long HeNe tubes or heads. These are new power supplies and have European standard wire color code. Specifications: Input Voltage: 115 / 230 VAC ±10%, 50 to 400 Hz. Output Voltage: 1850 to 2450 VDC. Output Current: 5.5 to 7 mA, preset at 6.5 mA. Trigger Voltage: >10 KV Input Leads: 12 inches, 22 AWG. Flying. Output Leads: Alden high voltage connector Dimensions: 6.0 x 1.5 x 1.2 inches (154 x 39 x 31 mm) Mounting holes: 2.3 inch center spacing.Features:
4 second Turn-on delay (defeat by cutting violet wire loop) Alden high voltage output connector. Output current adjustable with onboard trimpot RoHS compliant -
Out of stock
Melles Griot model number 05-LPM-915-065 This is a new, old stock power supply that will operate a typical 17 to 20 inch long HeNe laser head. Specifications: Input Voltage: 115 / 230 VAC, 50 to 400 Hz. Output Voltage: 3100 to 3700 VDC. Output Current: 5.5 to 7.0 mA user adjustable. Preset at 6.5 mA Trigger Voltage: >12 KV Input Leads: 12", 22 AWG. Flying. Output Leads: 12", Alden high voltage connector. CDRH delay: 4 seconds. (Defeatable by cutting violet wire loop) Dimensions: 7" X 2.4" X 1.4" (178 x 61 x 36 mm) Mounting holes: 0.15" diameter x 3, 2.95" x 1.8" center spacing. Warranty: 30 days from date of purchase. -
Out of stock
The Melles Griot model 05-LPM-968-065 will operate most 8 to 11 inch long HeNe tubes or heads. These are new units and have European standard wire color code. Specifications: Input Voltage: 115 / 230 VAC ±10%, 50 to 400 Hz. Output Voltage: 1600 to 2000 VDC. Output Current: 5.5 to 7 mA, preset at 6.5 mA. Trigger Voltage: >10 KV Input Leads: 10 inches, 22 AWG. Flying. Output Leads: Alden high voltage connector Dimensions: 6.0 x 1.5 x 1.2 inches (154 x 39 x 31 mm) Mounting holes: 2.3 inch center spacing.Features:
4 second Turn-on delay (defeat by cutting violet wire loop) Alden high voltage output connector. Output current adjustable with onboard trimpot RoHS compliant -
The Melles Griot model 05-PSAA-905-065 will operate most 8 to 14 inch long HeNe tubes. These are new units and have European standard wire color code. Specifications: Input Voltage: 115 / 230 VAC ±10%, 50 to 400 Hz. Output Voltage: 1850 to 2450 VDC. Output Current: 5.5 to 7 mA, preset at 6.5 mA. Trigger Voltage: >10 KV Input Leads: 4.5 inches, 22 AWG. Flying. Output Leads: Flying, 10 inches cathode lead with tube clip, 5 inches anode lead with slide-on ballast resistor (80K Ohm). Dimensions: 6.0 x 1.5 x 1.2 inches (154 x 39 x 31 mm) Mounting holes: 2.3 inch center spacing.Features:
4 second Turn-on delay (defeat by cutting violet wire loop) Output current adjustable with onboard trimpot. RoHS compliant. -
Alden style, high voltage extension cable with a male and female connector. Coax cable is 6 feet (1.8M) long and rated at 15KVDC. -
High quality German made beam expander / collimating lens system, focusable and adjustable from 2x to 8x magnification. The anti-reflective coatings are optimized for 633 to 980nm. Dimensions are 150mm long by 42mm dia. max. Mounting dia. (center section) is 37.6mm. . -
Female Alden style, high voltage connector with 2 feet (0.6M) wire leads. Silicon wire leads are rated at 30KVDC, 22AWG -
Female Alden style, high voltage connector with 6 feet (1.8M) of coax. Coax cable is rated at 15 KVDC. -
Melles Griot model 05-FDS-207 fiber optic laser beam delivery system in factory box. This model is designed for peak efficiency at 633nm but will also work well with Yellow and Orange HeNe lasers . It produces a well collimated beam and maintains polarization. This is a used, tested system.
System includes:
-
Kinematic fiber launch with standard laser head mount
-
1 meter fiber optic cable with pre-aligned optics
-
-
We stock Voltex HeNe laser power supplies known for their high efficiency, reliability, and rugged construction. Hook-up diagram included. Specifications: Input Voltage: 110 / 220 VAC, 50 to 60 Hz. Output Voltage: 3200 to 4000 VDC. Output Current: 8 to 11 mA, user adjustable. Trigger Voltage: 12 KV Input Leads: 10", 22 AWG. Flying. Output Leads: Alden high voltage connector or equivalent. Dimensions: 4.3" X 3.3" X 1.3" Mounting holes: 2.3" center spacing. Warranty: 30 days from date of purchase. -
Out of stock
These are new, old stock hard sealed laser tubes for your OEM, replacement, or experimental needs. Other types of tubes may be available. Please email us for more information. SPECIFICATIONS: Manufacture / Part Number: Uniphase model 1018 Output Power: 2.0mW minimum Wavelength: 632.8 nm RED Polarization: Random Mode: TEMoo Beam Diameter: 0.55 mm Beam Divergence: 1.5 mRads. Light Exit: Cathode end of tube. Operating Voltage: 1700 VDC (with 68 K ballast). Start Voltage: 8 KV. Operating Current: 4.5 mA Ideal. Recommended Ballast Resistor: 68 K Ohms, 2 Watt. (Add in series to the anode lead within 3" of the tube.) Recommended Power Supply: E-15, DG-15 Dimensions: 7.5" (191 mm) long x 1.0" (25.4 mm) diameter. Warranty: Limited 30 days from date of purchase. -
New voltex inc lab style Helium Neon laser power supply. Features include:- Universal AC power input: 100 to 240 VAC 50/60 Hz.
- CDRH compliance: Key switch, pilot light, turn-on delay, and remote interlock.
- CE compliance
- Compact size: only 1.5 x 4.13 x 7.88 inches ( 38 x 150 x 200mm)
- High efficiency: >85% conversion efficiency for cool operation and long life.
- Internal bleed-down resistor: to reduce shock hazard from the laser head.
-
New voltex inc lab style Helium Neon laser power supply. Features include:- Universal AC power input: 100 to 240 VAC 50/60 Hz.
- CDRH compliance: Key switch, pilot light, turn-on delay, and remote interlock.
- CE compliance
- Compact size: only 1.5 x 4.13 x 7.88 inches ( 38 x 150 x 200mm)
- High efficiency: >85% conversion efficiency for cool operation and long life.
- Internal bleed-down resistor: to reduce shock hazard from the laser head.
-
Voltex Inc. Lab style Helium Neon laser power supply. Features include: Universal AC power input: 100-120 / 200-240 VAC 50/60 Hz. CDRH compliance: Key switch, pilot light, turn-on delay, and remote interlock. Compact size: only 1.5 x 4.13 x 7.88 inches ( 38 x 150 x 200mm) High efficiency: >85% conversion efficiency for cool operation and long life. Internal bleed-down resistor: to reduce shock hazard from the laser head. Specifications: Input: 100-120 / 200-240 VAC 50/60 Hz. Uses business machine type AC cord. Includes an AC cord with a North American standard connector. Output: 3200-4000 VDC, 5 to 9.5 mA* (factory preset at 6.5mA) *Output current adjustable via internal trim potentiometer.* ** Please contact us if you would like us to preset the current to a specified amount.** Start voltage: >12KV. Line filtering: Internal EMI line filter. Output fault protection: Open circuit, short circuit, and arc conditions. CDRH delay: 3 to 5 seconds. Defeatable by cutting internal violet wire loop. Output connector: Alden high voltage connector or equivalent. Remote interlock: Jones plug type low voltage series circuit. Jumpered connector included. Dimensions: 1.5 x 4.13 x 7.88 inches ( 38 x 150 x 200mm). Warranty: Limited 1 year from date of purchase. -
New voltex inc lab style Helium Neon laser power supply. Features include:
- Universal AC power input: 100 to 240 VAC 50/60 Hz.
- CDRH compliance: Key switch, pilot light, turn-on delay, and remote interlock.
- CE compliance
- Compact size: only 1.5 x 4.13 x 7.88 inches ( 38 x 150 x 200mm)
- High efficiency: >85% conversion efficiency for cool operation and long life.
- Internal bleed-down resistor: to reduce shock hazard from the laser head.
-
Out of stock
Laser Drive inc. model number 314T-2300-6-4 Specifications: Input Voltage: 115 / 230 VAC, 50 to 400 Hz. Output Voltage: 2300 VDC. ∓200V Output Current: 6.0 mA Trigger Voltage: >10 KV Input Leads: 7", 22 AWG. Flying. Output Leads: Alden high voltage connector. CDRH delay: 3 to 5 seconds. (Defeatable by cutting violet wire loop) Dimensions: 4.3" x 3" x 1.2" (110 x 76 x 30 mm) Mounting holes: 0.15 diameter x3. 2.3" x 2.5" center spacing. Warranty: 30 days from date of purchase. RoHS Compliant -
Out of stock
Laser Drive inc. model number 314T-2450-6-4 Specifications: Input Voltage: 115 / 230 VAC, 50 to 400 Hz. Output Voltage: 2450 VDC. ∓200V Output Current: 6.5 mA Trigger Voltage: >10 KV Input Leads: 7", 22 AWG. Flying. Output Leads: Alden high voltage connector. CDRH delay: 3 to 5 seconds. (Defeatable by cutting violet wire loop) Dimensions: 4.3" x 3" x 1.2" (110 x 76 x 30 mm) Mounting holes: 0.15 diameter x3. 2.3" x 2.5" center spacing. Warranty: 30 days from date of purchase. RoHS Compliant -
Laser Drive Inc. model number 314S-1250-4-1 This is a new power supply with USA standard wire colors. It will operate a typical 5 to 7 inch long HeNe laser. Hook-up diagram included. Specifications: Input Voltage: 115 / 230 VAC, 50 to 400 Hz. Output Voltage: 1250 VDC ±200 VDC Output Current: 4.0 mA Trigger Voltage: >10 KV Input Leads: 12", 22 AWG. Flying. Output Leads: 12" Flying. CDRH delay: None Dimensions: 4.25" X 3.3" X 1.25" (108 x 84 x 32 mm) Mounting holes: 0.15" diameter 3x, 2.5" x 2.3" center spacing. Warranty: 30 days from date of purchase. -
Laser Drive Inc. model number 380T-2900-7-4 This is a new power supply with Japanese standard wire colors. It will operate a typical 18 to 25 inch long HeNe laser. Hook-up diagram included. Specifications: Input Voltage: 100-120 / 200-230 VAC, 50 to 400 Hz. Output Voltage: 3900 VDC ±200 VDC Output Current: 7.0 mA ±1.0mA user adjustable via trim pot. Preset at 7.0 mA Trigger Voltage: >12 KV Input Leads: 12", 22 AWG. Flying. Output Leads: 12", Alden high voltage connector. CDRH delay: 4 seconds. (Defeatable by cutting violet wire loop) Dimensions: 7" X 2.4" X 1.4" (178 x 61 x 36 mm) Mounting holes: 0.15" diameter 3x, 2.95" x 1.8" center spacing. Warranty: 30 days from date of purchase. -
Nylon cradle mount for 1.5" to 2" diameter laser heads. Mounts accept a cable tie to secure the head to the mount. Dimensions are 1.65" x .73" x .63" with a .177" diameter mounting hole. Set of 2 cradle mounts. -
Nylon cradle mounts for 1 to 1.5" diameter laser tubes. Mounts accept a cable tie to secure the tube to the mount. Dimensions are 1" x .64" x .42" with a .20" diameter mounting hole. Set of 2 cradle mounts. -
Male Alden style, high voltage connector with 2 feet (0.6M) wire leads. Silicon wire leads are rated at 30KVDC, 22AWG -
Male Alden style high voltage connector with 6 feet (1.8M) of coax. Coax cable is rated at 15KVDC. -
Out of stock
These are lightly used, Helium Neon laser heads for your OEM replacement or experimental needs. Other types of heads may be available. Please call or email for more information. Specifications:MFG / Model: Melles Griot 05-LHP-123-496 Output Power: 1.8 mW minimum, 2.4 mW typical Wavelength: 632.8nm RED Polarization: Linear, 500:1 Mode: TEMoo Beam Diameter: 0.63 mm Beam Divergence: 1.28 mRads. Aperture Mount: 4x 4-40 tapped holes, 25.4 mm square spacing. Operating Voltage: 1750 VDC. Start Voltage: 10 KV. Operating Current: 6.5 mA Input Lead: Male Alden connector with a 229 mm long cord. (extension cord available) Recommended Power Supply: LAB-S-22, DG-22, E-21, F-22. Dimensions: 272 mm long x 44.5 mm diameter. Warranty: Limited 30 days from date of purchase.
-
Out of stock
These are new, old stock hard sealed laser tubes for your OEM, replacement, or experimental needs. Other types of tubes may be available. Please email us for more information. SPECIFICATIONS: Manufacture / Part Number: Melles Griot, model 05-LHR-004 Output Power: 0.6 mW minimum Wavelength: 632.8 nm RED Polarization: Random Mode: TEMoo Beam Diameter: 0.47 mm Beam Divergence: 1.7 mRads Light Exit: Cathode end of tube. Operating Voltage: 1290 VDC (with 68 K ballast) Start Voltage: 8 KV Operating Current: 3.0-4.5mA, 3.7mA Ideal Recommended Ballast Resistor: 68 K Ohms, 3 Watt (Add in series to the anode lead within 3" of the tube.) Recommended Power Supply: E-15, DG-15 Dimensions: 5.3" (145 mm) long x 1.0" (25.4 mm) diameter Warranty: Limited 30 days from date of purchase. -
These are new, old stock hard sealed laser tubes for your OEM, replacement, or experimental needs. Other types of tubes may be available. Please email us for more information. SPECIFICATIONS: Manufacture / Part Number: Melles Griot, model 05-LHR-006 Output Power: 0.8 mW minimum Wavelength: 632.8 nm RED Polarization: Random Mode: TEMoo Beam Diameter: 0.47 mm Beam Divergence: 1.7 mRads. Light Exit: Anode end of tube. Operating Voltage: 1290 VDC (with ballast). Start Voltage: 8 KV. Operating Current: 3.0-4.5mA, 3.7 mA Ideal. Recommended Ballast Resistor: 68 K Ohms, 3 Watt. (Add in series to the anode lead within 3" of the tube.) Recommended Power Supply: E-15, DG-15 Dimensions: 5.8" (148 mm) long x 1.0" (25.4 mm) diameter. Warranty: Limited 30 days from date of purchase.
